The Delta Touch Faucet Solenoid is a key component in the operation of the faucet, responsible for controlling water flow and temperature.
However, there may be instances where bypassing the solenoid becomes necessary. This article aims to provide a comprehensive guide on how to bypass the Delta Touch Faucet Solenoid, highlighting the reasons behind such a decision and offering step-by-step instructions.
Additionally, common issues that may arise during this process will be addressed, along with safety precautions and maintenance tips for those who have successfully bypassed the solenoid.
Key Takeaways
- Bypassing the Delta Touch Faucet solenoid eliminates the risk of malfunctions or failures and ensures a consistent water supply.
- The process involves disconnecting the power source, removing the handle and spout assembly, and connecting the hot and cold water lines directly.
- Common issues may include water leaks, reduced functionality in touchless mode, and voiding the manufacturer’s warranty.
- Safety precautions and maintenance tips include regularly inspecting plumbing connections, proper grounding of electrical components, and following the manufacturer’s guidelines for cleaning and sanitizing.
Reasons to Bypass the Delta Touch Faucet Solenoid
One reason to bypass the Delta Touch Faucet Solenoid is to avoid potential malfunctions or failures of the solenoid mechanism. The solenoid is responsible for controlling the flow of water in these touch-sensitive faucets, and if it fails, it can lead to issues such as no water flow or continuous water flow. By bypassing the solenoid, users can eliminate the risk of malfunctions and ensure a consistent water supply.
However, there are pros and cons to this approach. On one hand, bypassing the solenoid allows for manual control over water flow without relying on electronic components. On the other hand, it eliminates the touch-sensitive functionality that many users find convenient.
Alternative solutions include repairing or replacing the solenoid if it malfunctions, or considering non-touch faucets as an alternative option altogether.
Tools and Materials Needed for Bypassing the Solenoid
To successfully bypass the solenoid of a Delta touch faucet, it is necessary to have certain tools and materials readily available. The process requires a few specific tools for efficient completion.
Firstly, a pair of pliers or adjustable wrench is needed to loosen and remove the solenoid assembly. Additionally, a small screwdriver may be required to disconnect any electrical connections attached to the solenoid.
In terms of materials, it is essential to have Teflon tape on hand for resealing purposes after bypassing the solenoid. This tape ensures that there are no water leaks once the solenoid is removed from the faucet system.
Lastly, having a clean cloth or rag nearby can help with any spills or drips that may occur during the bypassing process. By having these tools and materials ready, one can effectively perform the task of bypassing a Delta touch faucet solenoid.
Step-by-Step Guide to Bypassing the Delta Touch Faucet Solenoid
The step-by-step guide for bypassing the solenoid of a Delta touch faucet involves several sequential actions.
Firstly, turn off the water supply to prevent any potential risks or accidents.
Next, disconnect the power source by unplugging the faucet from its electrical outlet.
Then, remove the handle and spout assembly to access the solenoid valve.
Carefully detach the solenoid valve from its housing by loosening any bolts or screws that secure it in place.
Once removed, connect the hot and cold water lines directly to each other using a suitable connector, such as a T-connector or compression fitting.
Finally, reassemble all parts of the faucet, ensuring they are properly aligned and tightened.
It is important to note that bypassing the solenoid is not recommended by Delta and may void any warranty on your faucet.
Additionally, alternative methods exist which involve replacing rather than bypassing the solenoid valve for more reliable operation in touchless mode.
Common Issues and Troubleshooting Tips for Bypassing the Solenoid
Common issues encountered when bypassing the solenoid valve of a touch faucet include potential water leaks, reduced functionality in touchless mode, and voiding of the manufacturer’s warranty.
When troubleshooting Delta touch faucet solenoids, it is important to address these common issues effectively.
Potential water leaks can occur if the bypass method used does not provide a secure connection between the water supply lines and the faucet. To mitigate this issue, ensure that all connections are tightly sealed using appropriate plumbing techniques or consult a professional plumber for assistance.
Reduced functionality in touchless mode may arise due to improper wiring or incorrect installation of the bypassed solenoid valve. Adhering strictly to manufacturer’s instructions during installation can help resolve this issue.
Safety Precautions and Maintenance Tips for Bypassed Delta Touch Faucets
Safety precautions and maintenance tips for touchless faucets that have had their solenoid valves bypassed include:
- Regular inspection of the plumbing connections
- Ensuring proper grounding of electrical components
- Following manufacturer’s guidelines for cleaning and sanitizing the faucet
Bypassing the solenoid valve in a Delta touch faucet can offer convenience by allowing manual operation of the faucet without relying on electronic sensors. However, there are potential risks associated with this modification.
One risk is the potential for water leaks or improper functioning due to incorrect plumbing connections or loose fittings. Another risk is the possibility of electrical hazards if proper grounding is not maintained during installation or maintenance.
To properly maintain a bypassed Delta touch faucet solenoid, it is important to:
- Regularly inspect all plumbing connections for leaks or damage
- Ensure that electrical components are properly grounded
- Adhere to manufacturer’s guidelines for cleaning and sanitizing to prevent any issues from arising.