Table of Contents
Nothing is more frustrating than unclogging a toilet bowl filled with poop. Most of the time, you can use a DIY solution before you have to call a plumber.
You can still use a plunger on a visibly clogged toilet, and a toilet brush helps you clean afterward.
These are some of the basic remedies that you can use to deal with toilet clogs. Make sure you protect yourself with rubber gloves as you attack the blockage.
Put plastic wrap on the floor if you’re concerned that the water level might overflow.
Your toilet brush is there to clean stains and stuck-on materials from the toilet bowl. If the clog isn’t too far down the toilet drain, you can use your brush to dislodge and break it up.
Then try flushing the toilet again.
If breaking up the mass doesn’t work, then there might be a more serious blockage deeper in the pipes.
The plunger is the go-to way to resolve clogs. Most clogs don’t need any more treatment than this.
You’ll simply fit the plunger over the drain until a vacuum seal is created. Flange models are better for toilets because they’re specifically designed for the curve of the drain.
Keep a garbage bag nearby in case any waste sticks to the plunger. You might also consider placing plastic foil on the floor and sides of the toilet in case of splashing.
Once you’ve created the seal, push vigorously up and down several times. This will create suction that forces the clog to dislodge.
Depending on how bad the clog is, you might repeat this anywhere from 3 to 15 times.
After this, flush your toilet and see if the clog disappears. You might have to repeat the process a few times. If it doesn’t work, it’s time to move on to the next steps.
Chances are, you have a cloth hanger in your closet that’s made from metal wire. You can use this as a homemade toilet auger, as long as the clog isn’t too far in the pipes.
Unravel the wire with pliers. Then bend the end until it creates a hook.
Push the hook down the drain, feeding the wire in until you hit the clog. Keep pushing until the pressure releases.
Once the drain feels clear, you can take the hanger out and flush the toilet. The hook should grab any hair or toilet paper that can’t dissolve in the pipes.
This tried-and-true remedy is extremely popular for unclogging toilets. It is much better for your pipes than bleach or other commercial chemicals.
First, you’ll pour some baking soda down the drain. Then you’ll add a cup of vinegar.
This will create a chemical reaction that clears built-up waste from the pipes.
It’s best to do this once you’ve cleared enough of the clog to partially flush the toilet.
Hot water is a popular option for unclogging drains, no matter whether they’re in your sink, bathtub, shower, or toilet.
Boil a gallon of water on the stove. Let it cool down until it is warm water so that it doesn’t cause potential damage.
Then you can pour it into your toilet. It may help to dissolve and dislodge some of the clog.
Some people recommend adding dish soap to the mixture.
Another option is to pour hot water into the toilet bowl after the vinegar and baking soda have worked in the pipes for about 30 minutes.
Coca-cola might be a more quirky way of dealing with a toilet clog, but some people swear by it! All you need is half a liter of the drink, along with plastic foil.
Pour the soda into the bowl. Then lift the toilet seat and cover the bowl completely with the foil.
Leave the toilet for an hour. The combination of soda and plastic will cause the toilet to pressurize.
This will make it much easier to flush the clog because you get more power with the flush. Make sure you flush prior to removing the plastic.
An auger uses the same principle as your wire hanger. But it is a heavy-duty, professional plumbing tool.
Basically, you’ll unwind a wire through your pipes until it reaches the clog. Since the wire is flexible, it can reach much deeper than your coat hanger.
You’ll break the blockage up into small pieces so that they can be flushed. If your toilet is clogged because of non-flushable items, the auger can grab and remove them.
Toilet augers are covered in rubber to prevent them from scratching your pipes or toilet. You can buy them from Amazon or a hardware store.
If none of these solutions work, then it’s time to call a plumber. Yes, the bill might be expensive, but you need to find out what’s wrong with your pipes.
And you need your toilet to be usable again!
You might be tempted to use harsh chemicals like household bleach or Drano. But neither of these is a good solution.
Bleach won’t break down the materials causing the clog, and too much of it can damage your pipes.
Drano is far too harsh for your plumbing system, and it’s built for sinks rather than toilets.
Most of the time, your plunger and brush will be enough to save you. As long as you take the proper precautions to keep your hands and bathroom clean, the issue won’t be as gross as you feared.